Page 225 - SKF-bearing-housings
P. 225
Ordering information
Accessories
The following accessories are available for
SNL housings in the 30, 31 and 32 series:
• Oil leveller: LAHD
• Automatic lubricators: SKF SYSTEM 24 or
SKF MultiPoint. If frequent relubrication is
required and SKF SYSTEM 24 is to be used,
combine it with LAPM 4 (Manifold 4 to 1). 5
• Grease meter: LAGM 1000E
• Condition monitoring sensors
For additional information, refer to SKF tools
and products († page 47).
Ordering information
For SNL housings in the 30, 31 and 32 series,
each of the following items must be ordered
separately:
• housing
• seals
• end cover
• locating rings
• bearing
• adapter sleeve
Order example
Two plummer block housings with labyrinth
seals are required for two 23036 CCK/W33
bearings on H 3036 adapter sleeves. One
housing will accommodate the non-locating
bearing at the end of the shaft. The other
housings will accommodate the locating
bearing and a through shaft.
The following items should be ordered (in
addition to the bearings and adapter sleeves):
• 2 housings SNL 3036
• 3 labyrinth seals TS 36
• 1 end cover ETS 36
• 2 locating rings FRB 17/280
221