Page 344 - Rollingbearings

2 Insert bearings (Y-bearings)
Insert bearings with For demanding operating conditions that Stainless steel bearings
grub screws occur in agricultural applications, such as • are intended for use in corrosive
combines and balers, harvesters and disk
harrows, SKF has designed the YARAG 2 environments
• are suitable for applications for both con- bearing series (ig. 11). These bearings: • are available with an inner ring extended
2 stant and alternating directions of rotation on both sides (bearing series
• are locked onto the shaft by tightening the • are itted with a patented 5-lip seal (5-lip YAR 2 -2RF/HV)
two cup point hexagonal grub (set) screws, seals, page 346) • have all steel components made of stain-
positioned 120° apart in the inner ring • are supplied without any lubrication holes less steel, including rings, balls, sheet
in the outer ring metal parts of both seals and lingers, and
grub screws
Basic design bearings • are capped on both sides with a highly
Bearings with zinc-coated effective multiple seal (Multiple seals,
• are available with an inner ring extended rings page 346) made of food-compatible rubber
on one side (ig. 9, bearing series YAT 2) with a stainless steel insert and a stainless
• are available with an inner ring extended • are intended for use in corrosive steel linger
on both sides (ig. 10, bearing series environments • are illed with a food-grade grease
YAR 2) • are available with an inner ring extended • have an annular groove with one lubri-
• are capped on both sides with: on both sides (bearing series cation hole in the outer ring, located on
– a rugged standard seal (Standard seals, YAR 2 -2RF/VE495) the side opposite the locking device
page 345) for bearing series YAT 2 • have grub screws made of stainless steel • have a lower dynamic load carrying capacity
– a rugged standard seal and an additional • are capped on both sides with a highly than same-sized bearings made of high
plain sheet steel linger (Standard seals effective multiple seal (Multiple seals, grade carbon chromium steel
with additional lingers, page 345, page 346) made of food-compatible rub-
designation sufix 2F) or a rubberized ber with a stainless steel insert and a
sheet steel linger (Multiple seals, stainless steel linger
page 346, designation sufix 2RF) for • are illed with a food-grade grease
bearing series YAR 2 • have two lubrication holes in the outer
• have two lubrication holes in the outer ring, one on each side, positioned 120°
ring as standard, one on each side, pos- apart
itioned 120° apart
• can be supplied without lubrication holes
on request (designation sufix W)

Fig. 9 Fig. 10 Fig. 11
Bearing in the YAT 2 series Bearing in the YAR 2 series Bearing in the YARAG 2 series

342