Page 87 - Single-line automatic lubrication systems

Pump unit

FK
Pump units for grease

FK – 1M 04 – – – AF 07
Identification code

Product series
Version
1= Unit for single-line centralized lubrication
systems
2 = Unit for dual-line centralized lubrication
systems with change-over valves
3 = Unit for dual-line centralized lubrication
systems without change-over valves
4 = Unit for progressive systems
Lubricant reservoir
15 = 15 kg, 33 lb
30 = 30 kg, 66 lb
60 = 60 kg, 132 lb
Monitoring
X = Without lubricant level monitoring
U2 = Ultrasonic sensor with 2 switching points
Drive type
1M = Electrically operated
Gear ratio
04 = 40:1
Metering quantity
1 = 0,67 kg/h, 12.3 cm 3 /min. 2 = 1,34 kg/h, 24.7 cm 3 /min.
3 = 2,00 kg/h, 37.0 cm 3 /min. 4 = 2,64 kg/h, 49.3 cm 3 /min.
5 = 3,34 kg/h, 61.7 cm 3 /min. 6 = 4,00 kg/h, 74.0 cm 3 /min.
Pressure-regulating valve, factory-set to
200 = 200 bar, 2 900 psi (for progressive, single-line and dual-line centralized lubrication systems)
300 = 300 bar, 4 350 psi (for progressive, single-line and dual-line centralized lubrication systems)
Pressure gauge
/ = Without pressure gauge
MA = 1x pressure gauge
M2 = 2x pressure gauge
Filler socket/screw cap
0 = Without filler 2 = Without filler socket, with screw cap
socket
1 = With filler socket 3 = With filler socket and screw cap
Version key
0001 = Basic design
4001 = Basic design with control cabinet and control unit (on request)
Motor data
AF = motor speed 1 500 rpm, rated voltage 230/400 V AC, 50 Hz
Motor protection class
07 = IP 55 F

87