Page 43 - Multi-line-automatic
P. 43

Pump unit


           P 215
                                                                                                                      Pump units for grease



            Identification code                   P   215        –                     –         –



            Product series
            Drive
              M =  AC flange motor
              F =  free shaft end
              P =  oscillating drive
            Gear ratio
              490 = 490:1
              100 = 100:1
              049 =   49:1 (for oil only)
              007 =     7:1 (for P and F drive assemblies only)
            Reservoir
              4    = plastic, 4 l, 1.05 gal  30    = steel plate, 30 l, 7.92 gal
              8    = plastic, 8 l, 2.11 gal   100    = steel plate, 100 l, 26.42 gal
              10    = steel plate, 10 l, 2.64 gal
            Reservoir design
              YL    = for oil with floating-switch, low-level
              XY    = for grease and oil
              N    = without level control
              BU    = with level control (ultrasonic sensor for two switching points, low- and high-level)
            Pump elements, define max  15 elements (f i  11 elements K 7 = 11K7,    )
              1–15 = number of pump elements, adjustable
              K 5   = piston ∅ 5 mm, max  adjustable output per stroke: 0,11 cm 3 , 0.0067 in 3
              K 6  = piston ∅ 6 mm, max  adjustable output per stroke: 0,16 cm 3 , 0.0098 in 3
              K 7  = piston ∅ 7 mm, max  adjustable output per stroke: 0,23 cm 3 , 0.014 in 3
            Motor designation, supplements
              320–420, 440–480 = multi-range motor for nominal supply voltages, 380–420 V AC/50 Hz, 440–480 V AC/60 Hz
              500 =  single-range motor for nominal supply voltages, 500 V/50 Hz
              000 =  pump without motor, with coupling flange






                                               P215 pump elements and pressure-relief valves

                                               Order number  Description    Connection       Operating pressure max

                                                                                             bar        psi
                                               600-27464-2  pump element K 5  G  1 / 4       –          –
                                               600-25046-3  pump element K 6  G  1 /         –          –
                                                                              4
                                               600-25047-3  pump element K 7  G  1 /         –          –
                                                                              4
                                               303-19285-1  closing screw  1)    M 27 × 1,5  –          –
                                               624-25478-1  pressure-relief valve  tube stud ∅ 6 mm  200  2 900
                                               624-25479-1  pressure-relief valve  tube stud ∅ 6 mm  350  5 075
                                               624-25480-1  pressure-relief valve  tube stud ∅ 8 mm  200  2 900
                                               624-25481-1  pressure-relief valve  tube stud ∅ 8 mm  350  5 075
                                               624-25482-1  pressure-relief valve  tube stud ∅ 10 mm  200  2 900
                                               624-25483-1  pressure-relief valve  tube stud ∅ 10 mm  350  5 075
                                               304-17571-1  filler fitting  2)  G  1 / 4  female, M 22 × 1,5  –  –




                                               1)   for outlet port instead of a pump element
                                               2)   filling connector fits for vacant outlet ports

                                                             43
   38   39   40   41   42   43   44   45   46   47   48