Page 175 - Single-line automatic lubrication systems

Pressure sensor

DSC1

Pressure sensors

Description
Technical data
DSC1 pressure switches are electronic pressure switches with
integrated digital display for relative pressure measurement. Order number DSC1-B040E-2A2B
They are used primarily for pressure monitoring. Depending on
Function principle analogue/digital pressure switch
the design, they also can assume control functions. Pressure switch Lubricant oil and fluid grease NLGI 000, 00, 0
points, pressure indication, and the switching logic can be configured Operating temperature –25 to +80 °C
–13 to +176 °F
and programmed easily. The values are displayed as 4-digit alphanu- Operating pressure 1–40 bar in 0,5 bar steps
meric characters, at the same time there is an alternating display 14–580 psi in 7 psi steps
(red / green) to indicate the switching status. DSC1 can be operated Burst pressure 500 bar; 7 251 psi
with both hysteresis and window functions and the mode can be set Operating voltage 18 to 30 V DC
Power consumption
max. 35 mA
separately for each switching output. Output signal 2 signal outputs;
1 x PNP transistor stages or IO-Link
Vibration resistance 20 g (10-2 000 Hz)
Features and benefits Service life 100 × 10 6 pressure changes
• IO-Link
Material:
• Available for rising and falling pressures from Housing stainless steel
Control panel polycarbonate
1 to 40 bar in 0,5 bar increments Electrical connection M 12×1; 4-pin
Pressure port G 1 /4
• Can be operated with both, hysteresis and Protection class IP 67
window function modes Dimensions 34 × 91× 49,4 mm
1.33 × 3.58 × 37.4 in
• Encodable access protection Mounting position any
• Digital and analog output

Applications
• Machine tools
• Printing machines NOTE
Further technical information, technical drawings,
• Wind
accessories, spare parts or product function descriptions
• Vehicle available on SKF.com/lubrication:
• Steel and heavy industries 1-1701-EN

175