Page 37 - Multi-line-automatic

Pump unit

P 205
Pump units for grease

Identification code P 205 – – – –

Product series
Drive
M = AC flange gear motor
F = free shaft end
Gear ratio
280 =280:1
700 =700:1
070 = 70:1
Reservoir
4 = plastic, 4 l, 1.05 gal
8 = plastic, 8 l, 2.11 gal
5 = steel plate, 5 l, 1.32 gal
10 = steel plate, 10 l, 2.64 gal
30 = steel plate, 30 l, 7.93 gal
Reservoir design
N = without level control
XY = for grease and oil
XL = for grease with low level control )
BU = with level control (ultrasonic sensor for two switching points, low- and high-level)
Pump elements; define max 5 elements (f i 4 elements K6 = 4K6, )
K 5 = piston ∅ 5 mm, output per stroke: 0,11 cm 3 , 0.006 in 3
K 6 = piston ∅ 6 mm, output per stroke: 0,16 cm 3 , 0.009 in 3
K 7 = piston ∅ 6 mm, output per stroke: 0,23 cm 3 , 0.014 in 3
KR = adjustable output, piston ∅ 7 mm, output per stroke: 0,04-0,18 cm 3 , 0.002-0.010 in 3
Supplements to motor designation
320 - 420, 440 – 480 = multi-range motor for nominal supply voltage, 380-420 V AC/50 Hz, 440-480 V AC/60 Hz
500 = single-range motor for nominal supply voltage, 500 V/50 Hz
000 = pump without motor, with coupling flange

P205 pump elements Pressure-relief valve and filling connectors
Order number Description Metering quantity per Order number Description
stroke

cm 3 in 3
624-29056-1 pressure-relief valve, 350 bar,
G 1 / D 6 for tube ∅ 6 mm OD
4
600-27464-2 pump element piston K 5 0,11 0.006
624-29054-1 pressure-relief valve, 350 bar,
G 1 / 4 D 8 for tube ∅ 8 mm OD
600-26876-2 pump element piston K 6 0,16 0.009
304-17571-1 filling connector G 1 / 4 female 1)
600-26877-2 pump element piston K 7 0,23 0.014
655-28716-1 pump element 0,04–0,18 0.002–0.010
adjustable KR (7) 304-17574-1 filling connector G 1 / female 1)
2
303-19285-1 closing screw 1) – –

1) for outlet port instead of a pump element 1) filling connector fits for vacant outlet ports

37